blogspaster.blogg.se - Holdem manager 2 time setting

#Holdem manager 2 time setting pro#

By default a broadcast address is used.It is therefore recommended that you have no copy of Manager running when you start or restart the Voicemail Server. If you are running Manager when the Voicemail Server starts, then Voicemail does not start as a time server.The time request is sent when the system is started and every 8 hours afterwards.

In response to a request from a system, they will provide both the UTC time and local PC time. Use of other RFC868 server sources is not supported.

#Holdem manager 2 time setting pro#

The time request is sent when the system is started and every hour afterwards.īoth the Voicemail Pro service and the IP Office Manager application can act as RF868 time servers, obtaining the time for the PC on which they are running. The response is just a UTC time value, therefore the system has to be configured with the required offset for the local time value and also optional daylight savings values. SNTP can be used to make time requests to a list of NTP servers.

Simple Network Time Protocol (SNTP - RFC4330) (IP Office 6.1+).

The method used is set through the Time Server IP Address or Time Setting Config Source settings on the System | System form. The time can be set in a number of ways list below. For other activities such as call logs, SMDR records, time display on phones the local time (UTC + any offsets) is used.

The control unit contains a battery backed clock which is used to maintain system time during normal operation and when mains power is removed.įor files stored on memory cards the system uses the UTC time.